Hobby, 3D, Relief, CNC  

[ Új üzenetek · Tagok · Fórumszabályzat · Keresés · RSS ]
  • Oldal 3 / 3
  • «
  • 1
  • 2
  • 3
A fórum moderátora: KisKZ, tweakie, Amatőr  
Fórum » Only in English » Mach3 related issues » Wood Routing. (Anything about Wood Routing / Milling.)
Wood Routing.
tweakie Dátum/Date: Kedd, 2014-05-13, 13:46 | Üzenet/Post # 41
alapvető tag
Csoport/Group: Adminisztrátorok
Üzenetek/Posts: 1050
Kitüntetések/Medals: 6
Hírnév/Fame: 5
Helyzet/Status: Offline
Nice work Dave  respect

Tweakie


Success consists of going from failure to failure without loss of enthusiasm.
 
tweakie Dátum/Date: Szerda, 2014-05-14, 09:19 | Üzenet/Post # 42
alapvető tag
Csoport/Group: Adminisztrátorok
Üzenetek/Posts: 1050
Kitüntetések/Medals: 6
Hírnév/Fame: 5
Helyzet/Status: Offline
Another V-Carving smile

Tweakie.

Csatolások/Attachments: 1709865.jpg (87.3 Kb)


Success consists of going from failure to failure without loss of enthusiasm.
 
picengraver Dátum/Date: Szombat, 2014-05-17, 11:28 | Üzenet/Post # 43
Fontos tag
Csoport/Group: Felhasználók
Üzenetek/Posts: 528
Kitüntetések/Medals: 3
Hírnév/Fame: 2
Helyzet/Status: Offline
Tweakie and Dave,
Thanks for increasing my envy with your excellent work. smile
John


I paint with a blue light beam.
 
dadiy Dátum/Date: Kedd, 2014-05-27, 13:19 | Üzenet/Post # 44
nézelődő tag
Csoport/Group: Felhasználók
Üzenetek/Posts: 10
Kitüntetések/Medals: 0
Hírnév/Fame: 0
Helyzet/Status: Offline
Here's a little bit of fun from the weekend.  I call these woods (like cards) so this would be a Father's Day Wood.

This one is in tulip and has had a couple of coats of sanding sealer,  before it gets a few coats of melamine and a dusting of spray glitter :).

Csatolások/Attachments: 2626477.jpg (119.6 Kb)
 
tweakie Dátum/Date: Kedd, 2014-05-27, 17:27 | Üzenet/Post # 45
alapvető tag
Csoport/Group: Adminisztrátorok
Üzenetek/Posts: 1050
Kitüntetések/Medals: 6
Hírnév/Fame: 5
Helyzet/Status: Offline
Beautiful work Dave respect

Tweakie.


Success consists of going from failure to failure without loss of enthusiasm.
 
Fórum » Only in English » Mach3 related issues » Wood Routing. (Anything about Wood Routing / Milling.)
  • Oldal 3 / 3
  • «
  • 1
  • 2
  • 3
Keresés:

Copyright HobbyCnCArt © 2023